Looking
for
something in particular? Enter your keyword here:
|
 |
Gared
Adjust-A-Goal IN STOCK!
Adjust-A-Goals
are available with manual or electric operation. Adjust-A-Goals
feature
direct goal attachment transferring the load of hard play directly
through
the backboard to the support structure.
Recreational
system with traditional gooseneck appearance.
Includes:
1202 GP1 54" X 36" steel fan backboard, SR2 rim, & OD1 or OD1a
pole.
Heavy
duty galvanized pole.
Direct
mount maximizes strength of rim mounting area.
Shown
with Fan Shaped Backboard (not included)
|
 |
Gared
Manual Adjust-A-Goal
Manual
backboard height adjustment system. Lower your existing backboard
and goal for youth play without compromising the stability of the
equipment. Height
changed with an awning-type hand crank. Features a screw rod with high
enough gear ratio to hold backboard in place at any height
This
backboard
accessory allows the goal to be adjusted to any height between 8' and
10'
to accomodate play for all ages. Goal height indicator is easily
visible
from the floor for accurate adjustment
1130 is
designed for single post backstop mounting, usually with ceiling
mounts.. 1140 is designed for dual
post
mounting, which is for most wall mounts, including the Gared 2300,
2400, and 2500.
Shipping
weight 110 lbs. each
2 Year
Limited Warranty
Board
and Goal not included
Manual
Adjust-A-Goal 1130
Single
Post (Ceiling) Mounting
|
Price:
|
including shipping - $699
|
(ITEM
ADJUSTAGOAL1130)
|
Manual
Adjust-A-Goal 1140
Dual Post
(Wall) Mounting
|
Price:
|
including shipping - $749
|
(ITEM
ADJUSTAGOAL1140)
|
Hardware
Kit
This kit
is necessary if not purchasing
new Gared wall or ceiling mount structures. If add-on to Gared system
purchase
this is not necessary
|
Price:
|
including shipping - $149
|
(ITEM
ADJUSTAGOALKIT)
|
|
|
|
Gared
Electric Adjust-A-Goal
Electric
backboard height adjustment system Height
adjusted with 115-volt electric linear actuator with 600 lbs. capacity
Built-in
limit switches ensure safe operation and automatically shut off at 10'
and 8'
Board
may be set at any height in between
Choose
between power wand or key switch operation (requires additional
hardware
- see below)
1170 is
designed for single post backstop mounting. 1180 is designed for dual
post
mounting
Shipping
weight 110 lbs. each
2 Year
Limited Warranty
Board
and Goal not included
Electric
Adjust-A-Goal 1170
Single
Post (ceiling) Mounting
|
Price:
|
including shipping - $1199
|
(ITEM
ADJUSTAGOAL1170)
|
Electric
Adjust-A-Goal 1180
Dual Post
(wall)
Mounting
|
Price:
|
including shipping - $1299
|
(ITEM
ADJUSTAGOAL1180)
|
Hardware
Kit
This kit
is necessary if not purchasing
new Gared wall or ceiling mount structures. If add-on to Gared system
purchase
this is not necessary
|
Price:
|
including shipping - $149
|
(ITEM
ADJUSTAGOALKIT)
|
Hard
Wire Kit for Electric Adjust-A-Goal
Hard
Wire kit is required for each model 1170/1180 direct mount electric
adjust-a-goal
utilizing key switch operation. Each hard wire kit consists of:
One cord
mounted snap-lock male plug
One box
mounted femail twist-lock receptacle with cover
One cord
mounted male twist-lock plug
One
120-volt
single-keyed switch on stainless steel cover
Electrical
contractor shall supply all conduit, wiring, junction boxes and other
components
not listed above
Power
Wand and Wiring Kit for Electric Adjust-A-Goal
Affordable
method to operate electric adjust-a-goals when key switch operation
(requiring
field-wiring) is not available or desirable.
Top of
Power Wand plugs into special receptacle mounted to the adjust-a-goal
frame.
Opposite end of wand has electrical cord (standard grounded mal plug)
that
works with extension cords and standard wall outlets
Unit is
operated by a three-position momentary contact toggle switch
One Power
Wand unit will operate multiple adjust-a-goals
Requires
Power Wand Wiring Kit per electric adjust-a-goal
Electrical
contractor shall supply all conduit, wiring, junction boxes and other
components
not listed above
Power
Wand Wiring Kit
Power
Wand Wiring Kit is required for each adjust-a-goal utilizing power wand
operation. Kit includes:
One control
box with recessed male twist-lock plug and power cord with snap-lock
male
plug
Two 1/4"
- 20 X 3/4" screws, two lock washers, four plastic wire ties included
Electrical
contractor shall supply all conduit, wiring, junction boxes and other
components
not listed above
Hard
Wire Kit 1158
Kit per
goal
(ITEM
ADJUSTAGOAL1158)
|
Power
Wand 1159
Requires
1157 per goal
(ITEM
ADJUSTAGOAL1159)
|
Power
Wand Kit 1157
Kit per
goal
(ITEM
ADJUSTAGOAL1157)
|
|
|
Frequently
Asked Questions
|
