|
The
Glove Radar straps right on the back of your glove! It performs accurately
at any distance. It is not an impact sensor or timer. The Glove Radar "sees"
through the glove and measures the speed of the ball as it approaches the
glove.
Accuracy
is comparable to that of more expensive radar guns when measuring speed
in the same relative location.
The
Glove Radar can survive the pounding of repeated ball impacts when attached
behind the glove fingers.
One
single battery takes about 5000 speed measurements!
(ITEM GLOVERADAR)
|
|
Glove
Radar Specs
Triangular
shape, 2 1/2" Wide; 3 1/2" Long; 1 3/16" Thick
3 oz.
Speed
Range 20 - 120 MPH
Over 30
hours of continuous use; over 5000 transmission cycles (5000 speed measurements)
Powered
by single-cell lithium battery.
|
Guidelines for Preparing the
Throw
Taking care of your arm and body
and learning proper throwing techniques are vital to achieving success
in throwing/pitching a ball. Consult your coach, trainer, doctor
or parent for detailed guidance.
The following steps are strongly recommended:
1. Undertake a conditioning program to get your arm and body in shape for
baseball or softball.
2. Before throwing, stretch and warm-up your arm and body.
3. Begin throwing at slow speeds and over short distances. Gradually
extend the distance and increase the speed. The Glove Radar™ can
help
monitor this process.
4. Be sure you know and practice the proper throwing/pitching techniques.
By throwing correctly, you will be able to achieve your best velocity and
hit
your target, while reducing the liklihood of injuring your arm or body.
As
you learn and master the proper techniques, you will see improvements in
your performance. The Glove Radar™ will provide the measurements
by
which velocity performance improvements can readily be seen. This
reinforcement creates player enthusiasm for continuing to seek improvement
by applying the proper throwing/pitching techniques.
5. If you experience pain while throwing/pitching, or afterward, consult
your
doctor, trainer, coach or parent immediately. Do Not Ignore Pain!
6. Have fun with your Glove Radar™!
Here is a summary of proper throwing
techniques that will help you get the most out of your Glove Radar™.
Why Building Good Technique Is Important
1.By learning the proper throwing techniques, players can achieve their
best velocity and accuracy while reducing the risk of injury to their
arm and body.
2.Learning the proper throwing techniques when young, allows a
player's muscles and mind to develop the correct memory. Proper
throwing can therefore become a good habit that will stay with players
throughout their playing lives.
Getting Ready to Throw
1.Proper throwing starts with conditioning activities well before the ball
season begins.
2.Stretching and warming-up the entire body, as well as the shoulders
and arms, is necessary before actually starting to throw. "Warm-up
to throw; don't throw to warm-up", as stated by the American
Sports Medicine Institute.
3.Start throwing slowly, over a short distance. Gradually lengthen
the
distance and increase velocity. This warm-up period will vary with
the individual, but will be typically 10-20 minutes.
Some Proper Throwing Techniques
1.Plant the back foot, on the side of your throwing arm, and step with
the front foot toward the receiver.
2.As you step, turn the shoulder of your gloved hand also toward the
receiver.
3.Reach down and back for power, keeping your hand on top of the
ball palm down.
4.Extend the arm of the gloved hand forward, for balance, generally
with the elbow somewhat bent.
5.Keep your eyes on the target as you "come almost over the top" with
the ball. Sidearm throws are sometimes necessary in game situations,
but maximum velocity and accuracy can be achieved with an
overhand throwing motion. Let this be your natural motion.
6.Release the ball out in front of your body after your arm passes your
head.
7.Follow through with your arm and body -- do not let your throwing
side stay back.
8.Your arm follow-through will be a smooth arc down and across to the
opposite side of your body to allow your arm to slow down after
releasing the ball.
9.The entire throwing motion should be smooth, not herky-jerky.
10.Start off slowly until the entire process becomes natural and
comfortable.
Perfecting Your Technique
1.Work on receiving the ball coming to you on either side, high or low.
2.Get into your throwing position as you are receiving the ball.
3.To be best prepared to make a quick throw, catch the ball with both
hands so that the ball can be transferred easily to your throwing hand.
4.Get your body moving as you receive the ball so that your step
toward the receiver is a natural part of making the catch. A short
hop
or "crow-step" will give your body momentum to make the throw.
5.Try to get set before throwing. Avoid throwing off balance unless
it is
the only way to make the play quickly.
6.Practice getting rid of the ball quickly -- infielders to get a fast
runner,
and outfielders to nail the runner tagging-up or stretching a hit.
Imagine various game situations as you toss and practice.
Three Things That Make a Good Ballplayer
1.Practice
2.Practice
3.Practice
|